FL-3000/4500: How do I sync the key fob to the Gas Price Display
Topic
- How do I sync the FLR3-100 or FLR3-400 to the FL-3000\4500 display?
- How to sync a FLR3-100 keyfob to the displays.
- How to sync a FLR3-400 keyfob to the displays.
Environment
- Product: FL-3000, FL-4500, Fuelight., Gas, Petroleum, or Fuel Price Display, FL digit product
- Component: Handheld, Remote, Radio Receiver
- Control System: FLR3-100/FLR3-400 Key Fob (Wireless communication option)
Steps
Check out the setup video! --> https://www.youtube.com/watch?v=qAbSs1qaHw0.
- Power off the display
- Set the dip switches on the back of the FLR3-100 to select a unique/different security channel.
- Do not adjust the last dip switch on right, leave 0 down (may also be labeled as 10) (Picture shows switch toggle as BLACK).
- Ensure dip switches are set to either ON or OFF and not in between.
- Dip switches in the between position will cause the Key Fob to not function.
- Refer to Unable to Sync Keyfob to Sign, Keyfob Dip Switches Between On and Off Position for more info.
- Refer to Unable to Sync Keyfob to Sign, Keyfob Dip Switches Between On and Off Position for more info.
- Dip switches in the between position will cause the Key Fob to not function.
- Turn power on to display.
- While display is booting up, or within 5 minutes, press and hold line 1 (+) and (-) keys until the decimal flashes. 3 times. The decimal will only flash on the display that has the receiver card connected to it.
- Release the (+) and (-) buttons.
- Handheld and display should be paired.
Refer to the Installation Quick Guides for more information.
Consider factory resetting the display if this does not work FL-3000/4500: How do I factory reset a FL-3000/4500 series display with an FLR3-100/400 key fob. Please note that factory setting the display will remove all pricing (How to change the price on the FL-3000/4500 Gas Price Displays using the Key Fob?) and line mapping (FL-3000/4500: How to Line map, using key fob, Gas Price Displays) from the display.
KB ID: 000013190
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.