Daktronics

All Sport Pro: How do I configure a scoreboard?

Topic

  • Scoreboard configuration in All Sport Pro
Use this to define the settings used to communicate with “fixed-digit” scoreboards that feature 7-segment LED digits as well as “video” scoreboards created by sending score data to an LED video display.

Environment

  • Product: All Sport Pro UX
  • Components: 
  • Control System: All Sport Pro Suite
AllSportPro-Logo_Blue_400Square.png

Steps

This process is also explained in detail in in the All Sport Pro Manual and All Sport Pro Setup Guide. 

🔽Use the arrows to open and collapse the following sections

Access Scoreboard Creation. 
  1. Log in by Double-clicking the All Sport Pro desktop icon to open the application in your default web browser. 
  2. Enter your Username and Password, and then click Login.
  3. Click the hamburger icon in the top left corner and pick Scoreboards from the slide out.
  4. Click Add New.  

Scoreboard Name

  • Input a descriptive name for the scoreboard. Examples would be “Main Court” or “North End Zone”.

Team Name Alignment

  • Select the team name text alignment (Left, Right, or Center). 

In general, the Long settings are used for fixed-digit scoreboards that feature Team Name Message Centers (TNMCs), while the Short settings are used for team name output to a Daktronics All Sport CG score bug/TV feed.

    Scoreboard Communication (MDP)

    Select the method that will be used to communicate to fixed-digit scoreboard(s), either Serial or Network, as needed. 

    • Serial Port: Select an open serial (COM) port to output data to a fixed-digit scoreboard. When using a USB-to-Serial converter, the COM#'s may change depending on which USB port the converter gets plugged into. 
    • Network Interface: Select a network interface number from 1-6 that corresponds to the All Sport Pro Scoring Interface box. 

    Radio Group/Radio Channel

    Select the appropriate radio settings to communicate to fixed-digit scoreboard(s). The default setting for the radio receiver in a scoreboard is Broadcast Group 1, Channel 1. These settings will be visible when the scoreboard is first powered on as "b# C#". Note: For more information about radio group/channel settings, refer to the documentation provided with the scoreboard. 

    radio settings in clock digits.png

     
    Data Source

    Select the data source number from 1-20 over which to broadcast Real-Time Data (RTD) to video scoreboards. 

    Here is an example of a scoreboard configuration.  This example has 2 video displays.  They are configured to run together or can be split for separate control.  

    Scoreboard Configuration example.png

    Data Source (ERTD) corresponds to the following UDP. There are up to 20 ERTD ports. 

    image

    Enter the ERTD value.  - This will also determine the feeds created in Data Studio. 

    1. Navigate to the top left menu > Scoreboards. 
    2. Verify the ERTD value.  

    Screenshot 2024-06-13 133413.png

    A corresponding feed in Data Studio will be created for each ERTD value. 

    Screenshot 2024-06-13 133532.png

    Also see: All Sport Pro: How do I configure an ERTD feed?

    All Sport Pro: How do I configure a serial output?

    KB ID: 000004282

    DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

    DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

    The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.