Daktronics

DMP-8000: How do I setup ERTD via HTML web interface

Topic

  • How to Setup ERTD on a DMP-8000  via HTML web interface

Environment

  • Product Family: Control System
  • Product: DMP-8000 (VNET) version 7.25+
  • Components: 
  • Control System: 
RTD enables the user to manage Real-Time Data (RTD) sources including mapping Enhanced Real-Time Data (ERTD) sign numbers to zones that are configured for the display, adding data sources, and mapping colors to specific values. 

Steps

  1. Log into the DMP HTML web user interface. See:  How to use the DMP-8000 HTML web user interface .
  2. On the left side menu, click on the wrench icon to access the configuration menu
  3. Click on RTD
  4. Configure Sign Mapping
  5. Click Add Mapping under Sign Mapping.
  6. Enter the ERTD sign number to be assigned to a zone in the Sign # text box. Ensure the number does not conflict with the ERTD sign number of any other displays in the system
  7. Enter the name of the zone being added in the Zone Name text box. Note: The entered zone name must match the name in the .layout configuration file that originally defined the zone name or match the name in the VCS layout editor

If the DMP-8000 is using multi-sign output, replace the word "primary" with the name of the output.8000 USING MULTI-SIGN OUTPUT_2.png

If the DMP-8000 is not using multi-sign output ensure that the "primary/" name is included in sign mapping
Sign-zone mapping.png
  1.  Repeat steps to add additional zones.
  2. Choose a data source from the list of Available Sources by highlighting the needed source and clicking Add.DSRC.png
Note: The process of creating display zones and playing content in those zones varies according to the control system being used. Sign mapping is generally required if triggering content from older Daktronics equipment (Venus 7000, DSTI Trigger, DCS Script, etc. or some third-party equipment. 

Related Resources

DMP-8000: How to set up data source into the player

KB ID: DD3974488

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.