Module in Curved DVN display will not go back into face sheet after being removed.

Potential Symptoms

  • Module pulled out of display easily, but when being put back in it will not close.
  • Top portion of mod seems to interfere with the face sheet.

Environment

  • Product Family: DVN
  • Product: DVN 903 / 953 Curved Displays
  • Component: Modules

Cause

  • The 2mm Z-Axis set screw located directly under the power connector is extended on the mod and preventing it from seating completely into the channel of the face sheet.

Resolution

  • Use a 2mm T-Handle or Allen wrench and back out the set screw until flush. Insert the mod, then re-adjust the set screw if necessary.

KB ID: DD3702572


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.