Scoreboard partially lit after installation of receiver; Radio connected to wrong driver

Potential Symptoms

  • New installation of All Sport receiver in multiple driver scoreboard, has signal to one or more drivers but other driver sections are blank.
  • Guest section is lit but ball, strike, out, error and home sections blank.
  • Scoreboard is only partially lighting after installation of receiver.
  • Master driver section of scoreboard is blank but does show POST.
  • Blank section does not light with "all on" test from console.
  • In case of a baseball scoreboard with a pitch count drop in, may see an incomplete POST (no AD#, does the segment test, but then no B or C# either) if radio connected to pitch count driver.

Environment

  • Product Family: Scoreboards
  • Product: Outdoor Multiple Driver Scoreboard
  • Component: Gen 6 radio receiver
  • Control System: Wireless All Sport console, AS-5000 series R6, AS-1600 series R6

Cause

  • Radio is connected to wrong driver.

Resolution

  • Connect radio to the Primary driver to allow for the signal re-drive to reach remaining drivers in the scoreboard.

KB ID: DD3600986


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.