Daktronics

Digit and Price Displays: How do I Setup a DM-100 handheld for a Gas Price Display?

Potential Symptoms

  • Setup a DM-100 handheld to send prices to a FL-4500 display

Environment

  • Product Family: Digit and Price Displays
  • Product: FL-4500
  • Component: DM-100 display function
  • Control System:

Resolution

DM-100 (version 1.7 or lower)
  1. Power up the DM-100.
  2. When the message "Change Function? Press Set Function" appears, press Set Function key.
  3. When the message "Select Function" shows, press down arrow until you see "Rate Display", then press enter.
  4. Now that the DM-100 is set to Rate Display Mode, press the Menu key and down arrow until you see "Display Options Enter to Edit" and press enter.
  5. Press the down arrow until the display shows "000.0" and press enter.
DM-100 (version 3.4 or higher)
  1. Power up the DM-100.
  2. When the message "Change Function? Press Set Function" appears, press Set Function key.
  3. When the message "Select Function" shows, press down arrow until you see "Rate Display", then press enter.
  4. Now that the DM-100 is set to Rate Display Mode, press the Menu key and down arrow until you see "Display Menu" and press enter.
  5. Press the down arrow until the DM-100 shows "Display Options" and press enter.
  6. Press the down arrow until the display shows "000.0" and press enter.
Refer to the correct manual for more information.

KB ID: DD2793274

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.  

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.