How to upload translation table to a VIP-4060

stopsign.jpgThe steps outlined, if performed incorrectly, may result in equipment failure. Do not attempt these steps without proper training and understanding of product operation. Consult a Daktronics support technician if you need assistance.

Question

  • How to upload translation table to a VIP-4060

Environment

  • Product Family: Display Interface
  • Product: VIP-4060
  • Components:  Translation Table
  • Control System:

Answers/Steps

  1. Download the needed Translation Table (TT)  transfer it to the site computer. (Translation tables are provided by Daktronics Technician. )
  2. Login to the VIP-4060 that needs the Translation Table.
  3. Once logged into the VIP, navigate to the "Configuration" tab.
  4. Select the "Display" box on the left.
  5. In display on the right is the "Translation Table" section and select the "Upload".
  6. Browse to the T-table file that you downloaded earlier.
  7. Select the .hex file, and press open.
    1. This will then upload the new TT to the VIP. Allow the VIP to upload and install the TT, this could take a few minutes.
  8. Check display to see if the board is working with the new translation table.

KB ID: DD2284110


Fill out my online form.
DISCLAIMER: Use of this content may void the equipment warranty, please read this DISCLAIMER prior to performing any service of the equipment.