How to update CAN distribution board firmware using a VFC-3000 Controller

Topic

  •   How do I update the firmware on the CAN board?

Environment

  • Product Family: Transportation
  • Product: Vanguard
  • Components: CAN Board
  • Control System: VFC-3000

Steps

  1. This can be done remotely by pushing a file to the VFC-3000 controller, then using LCD simulator software.

    • Click on the link below & download LCD Simulator software. This software mimics an actual controller, as if you were on site in front of it.
    • Open the DFTP software.
      • Transfer the ED14482 file (from the local side) to the VFC-3000 (the remote side).
    • Update the CAN distribution board firmware using the VFC-3000 by navigating the menus.
      • Login to the LCD Simulator software.
        • Click on the white box, just below the green LCD area, and type the IP address of the sign.
        • Click on Connect, wait until the Screen displays: "Remote login".
        • Use the mouse to click on the buttons on the simulator, (don't use keys on your keyboard.)
        • Click on the Local/remote switch. (switches to Local mode)
        • Click on Enter.
        • Select CONFIGURATION.
        • Select SYSTEM CONFIGURATION.
        • Select REPROGRAM DEVICES.
        • Select REPROGRAM DISTRIBUTION BOARD M1.
        • Select ED14482.hex.
        • Select DETECT (RECOMMENDED).
        • Monitor progress. 
        • When complete, select REPROGRAM DISTRIBUTION BOARD M2.
        • Select ED14482.hex.
        • Select DETECT (RECOMMENDED).
        • Monitor progress.  Verify completed without errors.

KB ID: DD3964209


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.