OmniSport Pro software: How do I set an event to be a swimming or diving from an OmniSport 2000 console?
Topic
- How do I set a particular event to be a swimming or diving event from an OmniSport 2000 console?
Environment
- OmniSport 2000 Timing Console
- When using the console to enter in Event Order information, only basic information can be set:
- Event Number
- Round
- Distance
- Record Time
- Not likely using Hy-Tek computer.
- When event order information is sent from Hy-Tek or OmniSport Pro software, additional info can sent including:
- Event Number
- Round
- Distance
- Age Group
- Stroke
- Heat Title
- Record Time
- If wanting send event list info from Hy-Tek Meet Manager see: How do I send Hy-Tek Meet Manager event list information to a OmniSport 2000 timing console?, DD2686436
Steps
- From either swimming or diving mode, press MENU.
- Press the following keys on the numpad: [2]>[2]>[1].
- Otherwise arrow down once to the EDIT MENU, press ENTER.
- Arrow down once to EVENT ORDER, press ENTER.
- Press ENTER on EDIT ORDER.
- Enter in the event # and press ENTER.
- Use the right and left arrow buttons to sent the event's alpha designator (e.g. SEMI-FINALS, FINALS, etc...) and press ENTER.
- Enter in a distance
- For Swimming: Enter in a non-zero distance (e.g. 50 for a 50m or 50yd race).
- If desired enter in a record time (REC) and press ENTER otherwise bypass this time by simply pressing ENTER.
- For Diving enter in a distance of 0 (zero) and press ENTER.
- Instead of asking for a record time, it will show the dive order (A, B, C, or D) set for that event (default is A).
See the section 5.3 Edit Event Order for screen shots in the following manual:
OmniSport 2000 Timing Console and Pro Software Operation Manual (ED13312) (13.4mb)
KB ID: DD2686479
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.