How to send Hy-Tek Meet Manager event list information to a OmniSport 2000 timing console

Topic

  • How do I send Hy-Tek Meet Manager event/heat order information to a OmniSport 2000 timing console?

Environment

  • Product Family: Timing; Sports Product
  • Product: OmniSport 2000E
  • Component: OmniSport 2000E
  • Control System:  Hy-Tek Meet Manager

Steps

  1. From the main menu of MEET MANAGER, click Run.
  2. In the Run the Meet window, go to Interfaces > Time (DAK2) or Time (DAK2) pool 1 > Download Events to DAK2.
  3. The following message will appear. As long as the correct events are listed, click Yes.

    Download the events listed at top left of the Run screen to the OmniSport 2000 ?
  4. After the Event List has successfully transferred to the console, the following message will appear. Click OK.

    Event List was successfully downloaded !

Note:  A Hy-Tek Event List is composed of the following information:  Event #, Event Alpha, Round, Race Distance.  Heat information is not sent to the console at this point. When the OmniSport operator selects a particular race (event/heat) the timer will request the heat information.

KB ID: DD2686436


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.