DakTennis v3, Scoreboard: How to setup DakTennis using an All Sport for output using code 5900 in the All Sport

Potential Symptoms

  • Set up DakTennis or to use an All Sport for output instead of a signal converter

Environment

  • Product:Fixed Digit Scoreboard
  • Component DakTennis: Total Cricket Scoring (TCS) (not all of the below steps will apply to TCS)
  • Control System: All Sport 5100 w/ DB9F to DB9M cable OR All Sport 5010 w/ DB9F to DB9M cable
DakTennis has reached End of Life. See: Discontinued Products Resources
For alternate solutions, please contact professional services  https://www.daktronics.com/en-us/markets/sports/services

Resolution

  1. Yes, an All Sport 5100 or 5010 console can be used wired or wireless to send or broadcast the signal out.
  2. The input section of DakTennis is set up as normal.
  3. On the Output tab, select Add.
  4. Select MDP.
  5. Name the output, usually Scoreboard.
  6. Set the following:
    1. Port: Com port that has a DB9 cable out connected.
    2. Baud: 19200.
    3. Data Bits: 8.
    4. Parity: None.
    5. Stop Bits: 1.
  7. Click OK.
  8. All Sport 5100, Plug the other end of the DB9 cable from the laptop into the Computer I/O Port (J5) on the All Sport 5100.
  9. All Sport 5010, Plug the other end DB25 from the laptop into the Main Output and Input Port (J6) on the All Sport 5010.
  10. Turn on the All Sport Console.
  11. Enter in the Broadcast and Channel settings if the console is wireless.
  12. Enter in code 5900.
  13. You should now be able to populate data that comes from the RC-100s, into DakTennis, and out to the scoreboard.

KB ID: DD2339626


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.