All Sport 5000: How do I configure an Elam ending for basketball?
Topic
- Elam Endings
- G-League Basketball overtime configuration in All Sport 5000
Environment
- Product: All Sport 5000
- Component: DSTI
- Control System: Basketball
Steps
All Sport settings:
From the Main Menu, select the EDIT SETTINGS submenu to modify the settings.
Blank Main Clock (Elam Ending)
This setting will blank the main clock for scoreboard and RealTime Data outputs during all or specific periods. The running clock, counting either up or down, is still visible on the LCD.Note: TV feed clock is not blanked when this feature is enabled.
Use the left and right arrow keys to change the function:
- DISABLED: No change to the main clock operation (default).
- OVERTIME: (common setting for G-League 2022) Main clock scoreboard output and RTD fields 3 and 4 will blank on any period greater than the current Number of Periods (2 or 4) setting (3+ or 5+, respectively).
Considerations
Elam settings will blank the clock in the scoreboard output. RTD fields 3 and 4 will blank for virtual scoreboards on matrix displays. RTD fields 1 and 2 should still be populated and is used by things like DSTI.The default overtime period length is 5:00. If this time is allowed to expire, horn and light strips will still be triggered as configured. To avoid this, set the overtime length to a very high value, or set the main clock to count up.
- 4TH PER: Same behavior as above, but for any period greater than 3.
- ALL PER: Main clock is always blank regardless of period.
Shot Clocks: The Shot Clock Auto Blank feature will be ignored when the main clock is blank. Shot clock will continue to count down after main clock expires; if shot clock is allowed to expire, horn and light strips will still be triggered as configured.
With Shot Clock Sync w/ Main enabled, the main clock must still be started to run the shot clocks.
Related Resources
All Sport: How do I update firmware via a PROM replacement?
KB ID: 000026419
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.