FL-3000/4500: How do I setup cash/credit/debit options using key fob

Topic

  • How do I setup cash/credit/debit options for FL-3000/4500 displays using a key fob?

Environment

  • Product: Fuelight, FL-3000, FL-4500 (Firmware Rev 30 or higher), Gas, Petroleum, or Fuel Price Display, FL digit product
  • Component: Handheld, Remote
  • Control System: FLR3-100 Key Fob (Wireless Communication Option)

Steps

Check out the operational video! --> http://www.youtube.com/watch?v=vMk5hGrU0ag&feature=player_detailpage.

  1. Press and hold the down arrow (minus button) on Line 2 and the up arrow (Plus button) on Line 4 for about 5 seconds.  The below picture illustrates the buttons that should be pressed.
    Key Fob Cash Credit Mode.png
  2. The decimal point for the host driver will start to blink. When it starts to blink let go of buttons.  You will enter cash/credit configuration mode, and Line 1 will have the number corresponding to which mode you are currently in.
  3. Using the Down and Up arrow on LINE 1, change the number of price state(s) you want alternating on the displays. 
    • Annotation 2019-06-06 113119.PNG - Copy.jpg
  4. Press and hold the down arrow (minus button) on Line 2 and the up arrow (Plus button) on Line 4 for about 5 seconds to exit the Cash/Credit configuration mode.
  5. If needing assistance with changing prices see "How to change the price on the FL-3000/4500 Gas Price Displays using the Key Fob when a Cash/Credit display is being used?"

 

 

Example of a 3 Price setup (Cash, Credit, & Debit slots selected using the key fob).
Cash-Credit-Rendering-GIF_250x141.gif

KB ID: DD2825531


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.