Daktronics

Live Book: How do I physically connect components of a GFX system?

Topic

  • How do I physically connect components of the LIVEBOOK GFX system?

Environment

  • Product: SportApp
  • Component:
  • Control System: Live Book GFX®
LiveBookGFX-Logo_Blue.png

Steps

To ensure system functionality and communication between devices, physical connections of the system components should be made in the precise order described here.

Power on the system

  1. Connect the laptop power supply to the laptop.
  2. Connect the I/O box power supply to the 12-volt power connector on the left of the I/O Box, but do not power on the I/O box yet.
  3. Insert the USB connector on the wired mouse into a USB port on the laptop.
  4. Connect the Thunderbolt cable from the Thunderbolt connector on the I/O box to the Thunderbolt connector on the Live Book GFX.
    1. Contact AJT Systems support if the Thunderbolt cable requirement of your facility exceeds 6 feet.
  5. Power on the Live Book GFX laptop.
  6. Power on the I/O box.

Make input/output box connections

Make the video input and output connections through the BNC ports on the right side of the back of the I/O box.

  • In a control room or fully equipped production truck environment, the score bug is typically keyed over video at the switcher. You may opt to have the output of the switcher fed back to the Live Book GFX® system so that you can monitor the score bug over the video.
  • In a more streamlined remote situation, content from a camera feed goes directly to the I/O box and the score bug is internally keyed over the video. Video with the score bug is then output for uplink.
  • In addition to input and output, a reference signal (black burst or tri-level) should be connected to ensure smooth synchronization of video.
Use one of the following three sets of illustrated instructions to make the appropriate connections for your broadcast situation.

Make Scoreboard Feed Connections

The Live Book GFX® system can receive data from the stadium scoreboard:

Via serial interface

  • To connect the stadium clock feed via serial interface, use the serial to USB cable to connect to the available USB port on the Live Book GFX. Via TCP/IP

To connect the stadium clock via TCP/IP, connect the Live Book GFX to a network that has access to the TCP/IP Scoreboard feed.

  1. Configure the video connections. See: SportApp: How do I configure the SportApp?
  2. Enable scorebard connectivity on the SportApp.  See:SportApp: How do I enable scoreboard connectivity?

KB ID: DD3986414

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.