VIP-4400, VIP-4500 and VIP-4000: How do I load configuration
Topic
- How to load VIP configuration
Environment
- Product Family: Video Processor
- Product: VIP-4000, VLink-4000, VLink-4400, VIP-4400, VIP-4500, VLink-4500, DMP-7000
- Components: Overlay Mode
- Control System: DMP-7000
Steps
Open the Venus 7000 Shell and then click the VLink icon on the bottom right to open the V7 V-Link Controller.
From the Sign from the drop down menu select the sign that is associated with the VIP you wish to load configuration for.
Determine the Method used to save the files
Method 1 - Saving of individual files for each Channel
Method 2 - Saving of 1 file for all the channels.
If Method 1 was used to save files, use this section.
Select the VLink Indexed number and select channel 1 from the dropdown box.
Click on Send Configuration Settings, browse to the file for the desired channel and click on the file and press open. The program will freeze will loading is taking place. A confirmation box will appear when sending is complete. Click OK on that box.
Select the VLink Indexed number and select channel 2 from the dropdown box.
- Click on Send Configuration Settings, browse to the file for the desired channel and click on the file and press open. The program will freeze will loading is taking place. A confirmation box will appear when sending is complete. Click OK on that box. Repeat this process for Channels 3 and 4.
- Verify settings were taken, some settings did not take, resending a channel may need to occur.
If Method 2 was used to save files, use this section
- Select the VLink Indexed number and select channel 1 from the dropdown box.
Click on Send Configuration Settings, browse to the file that contains all of the channel configurations and click on the file and press open. The program will freeze will loading is taking place. A confirmation box will appear when sending is complete. Click OK on that box.
Note: Using this Method some settings may fail to set more often. If it fails Manual setting up of the VIP will need to occur.
If VXport needs to be loaded
KB ID: DD3874665
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.