Daktronics

How do I set the gain (input level) on a Yamaha 01V96 mixer?

Topic

  • How do I set the gain (input level) on a Yamaha 01V96 mixer?

Environment

  • Product Family: Audio Systems
  • Product: SSR-300 or Custom Rack
  • Components: Yamaha 01V96 Series Mixer
  • Control System:

Steps

Video Available

  1. Press the Layer 1-16 or Layer 17-32 button depending on what channel the gain is being set.
    layer.PNG
  2. Press the Home button under Fader Mode until the Channels 1-32 tab is selected at the bottom of the screen.
  3. Turn down the fader for the channel being set
  4. Locate the meter on screen for the channel
  5. Verify that the Meter mode is set on Level and Position is set to Pre EQ
    1. If these are not set to those values, use the large control knob and the ENTER button to select and change the values to Level and Pre EQ
      01v knob and arrows.png
  6. If the meter is showing high signal and the gain knob is turned all the way down, press the PAD button to reduce the signal level
  7. Adjust the gain knob until the signal level on screen for the channel being set shows around the -12 mark
    1. For media sources, play different files or tracks and/or different parts of files so that the gain isn't set too high because of a track with a low volume intro
  8. Bring the fader up to the desired volume level
  9. Repeat for any other channels that need to be set
Video Available

KB ID: DD3866565

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.