Gyrus replacement driver cannot be secured to driver tray. Nylon thread standoffs are still in place.
Potential Symptoms
- When replacing an older Legacy driver with a Gyrus driver, the driver tray thread posts appear to be too short and there is no room to attach the wingnuts to secure it.
- Gyrus Driver will not fit into a Legacy Shot Clock correctly.
- Unable to put the nuts back on to hold down the driver.
Environment
- Product Family: Sports Product
- Product: BB-2115
- Component: Any scoreboard model that utilizes a 0A-1230-0044 driver tray with 2 transformers.
- Control System: All Sport Console
Cause
- Nylon standoffs are still in place, which were required for the old Legacy drivers so that they didn't short out to the cabinet.
Resolution
- Remove the nylon standoffs as they are no longer needed when using a Gyrus driver.
- Mount the Gyrus driver flush with the driver tray. This should allow enough thread exposure for the wingnuts to make contact.
KB ID: DD3405640
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.