Daktronics

6000 Processor: What do all indicator lights on the P2K card represent?

Topic

  • What do all indicator lights on the DI-6000's P2K card represent?

Environment

  • Product: VP-6000, DI-6000 Series Processor 
  • Component:  P2K Card
  • Control System:

Steps

The DI-6000 indicator lights are for boot up and reconfiguration purposes.

 back plate LEDs.png

Typical boot up sequence

1. sequencing Green, Green, Green

2. sequencing Blue, Blue, Blue

 

 

3. fading Gold, Gold, Gold

 

 


4. sequencing Green, Green, Green

5. sequencing Blue, Blue, Blue
6. fading Blue, Blue, Blue

 

 


7. fading Cyan, Off, Off
 

 

8. fading Cyan, Cyan, Off
 

 

9. fading Cyan, Cyan, Cyan

10. fading Green, Green, Green
 

 

FPGA loading - indicated by count up sequence

    • Count up sequence is as follows:

      1. X

      2. X,Y

      3. X,Y,Z

    • Colors are

      1. Green, Green, Green

        1. Wait State

      2. Blue, Blue, Blue

        1. Programming

        2. Takes about 5 seconds

      3. Red, Red, Red

        initial programming failed, trying fallback images

Under system control (indicated by fading on and off)

    • Colors are

      1. Gold, Gold, Gold

        1. In 'gold' boot loading image

      2. Blue, Blue, Blue

        1. In 'production' image and not yet configured at all

      3. Magenta, Off, Off

        1. Programming flash Step 1

        2. Takes 5 minutes

      4. Magenta, Magenta, Off

        1. Programming flash Step 2

        2. Takes 5 minutes

      5. Magenta, Magenta, Magenta

        1. Programming flash Step 3

        2. Takes 5 minutes

      6. Cyan, Off, Off

        1. Hardware Initialization, Step 1

      7. Cyan, Cyan, Off

        1. Hardware Initialization, Step 2

      8. Cyan, Cyan, Cyan

        1. Hardware Initialization, Step 3

      9. Green, Green, Green

        1. Hardware Initialization is complete

KB ID: DD3287833

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.