DMP-8000 "Low Memory" error, Windows is not reporting the correct amount of system RAM

Potential Symptoms

Bomgar-[Pinned]-CR-MAIN-B-20151103101509.png 

 

 Bomgar-[Pinned]-CR-MAIN-B-20151103101903.png

  • Windows repeatedly issues a popup windows stating the system is low on memory and that you should close DMP-8000.
  • Re-booting the system does not resolve the issue.
  • The control panel system page reveals that not all of the memory is reporting as usable to windows.

Environment

  • A-2577 (DMP-8500 V-NET PRO)
  • Windows 7 64 Bit

Cause

  • RAM sticks are not communicating properly with the motherboard.

Resolution

  1. Power system down and remove AC power.
  2. Re-seat all of the RAM sticks, making sure they are put back into the same slot they were removed from.
  3. Power the system back up and check the Control Panel --> System page. Windows should be reporting the correct amount of RAM. If you are unsure how much RAM should be reported, look at either the primary or backup system with identical configuration, or contact TechOps for assistance.
  4. Test the system RAM by going to the Start menu then clicking RUN. Type mdsched.exe and click RUN.
  5. Allow the system to reboot and test the RAM. If any errors appear or if windows continues to report the incorrect amount of usable RAM in the system page, contact TechOps for ordering replacement RAM.

 

 

KB ID: DD3201548


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.