Daktronics

Does the wrestling riding time / advantage time change if the main clock's current time is changed

Topic

  • Does the wrestling riding time / advantage time change automatically if the main clock's current time is changed due to a request from the official for a false start.
  • Is there a way to recall riding time in wrestling on the All Sport?
    • For example, if there is a false start they have to reset the clock to what it was before the false start happened - does or can the riding time be recalled to not include the time caused by the false start.  Riding time should not include time in a false start.

Environment

  • All Sport 5000 Wrestling code

Steps


No.  The riding time will not adjust along with the adjustment made to add time to the main clock.  The All Sport operator will need to adjust the main clock's time up and determine if the advantage time clock was previously stopped, counting down, or counting up.
  1. Advantage time clock was stopped:
    1. Add (+) the requested time to the main clock.
      1. Press <SET MAIN CLOCK> button.
      2. Note the current time on the LCD.
      3. Add (+) the officials requested time.
      4. Type in the adjusted main clock time.
    2. No change to advantage time.

  • Advantage time clock was counting down:  
    1. Add (+) the requested time to the main clock.
      1. Press <SET MAIN CLOCK> button.
      2. Note the current time on the LCD.
      3. Add (+) the officials requested time.
      4. Type in the adjusted main clock time.
    2. Add (+) the same requested time to the advantage time.
      1. Press <EDIT> then <STOP ADVANTAGE CLOCK>.
      2. Note the current time on the LCD.
      3. Add (+) the officials requested time.
      4. Type in this adjusted advantage time.

  • Advantage time clock was counting up:
    1. Add (+) the requested time to the main clock.
      1. Press <SET MAIN CLOCK> button.
      2. Note the current time on the LCD.
      3. Add (+) the officials requested time
      4. Type in the adjusted main clock time.
    2. Subtract (-) the same requested time to the advantage time.
      1. Press <EDIT> then <STOP ADVANTAGE CLOCK>.
      2. Note the current time on the LCD.
      3. Subtract (-) the officials requested time.
      4. Type in this adjusted advantage time.

KB ID: DD3174561

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.