OmniSport: Cannot connect to the ENET console serially with Meet Manager for Swimming, Dive Meets, OmniPro Swim, or OmniPro Dive.

Potential Symptoms

  • OmniSport will not pass communication test in Meet Manager.
  • Loopback test passes through the MOXA com port.
  • OmniSport 2000e cannot communicate serially to Meet Manager.

Environment

  • OmniSport 2000 w/ENET
  • Hy-Tek Meet Manager for Swimming 5.0Ce
  • Dive Meets software
  • OmniPro Swim
  • OmniPro Dive

Cause

  • On the OmniSport 2000 console, Network enable for the MMR is set to ON.

Resolution

Per ED-13312 Section 5.12 change the following to NETWORK MMR: OFF  (MENU-4-7-7)

 

  • The network enable must be set to "off" for both swimming and diving modes.

For Temporary Operation

  • Connect to the OmniSport to the Hy-Tek computer with an ethernet cable.

KB ID: DD2871911


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.