Module Patterns Definitions
Topic
What are the Module test pattern definitions
Environment
- VIP 4060
Steps
PL6 Port A Health - will test the ProLink 6 connections via fiber port A on the PLRs. If a fiber going into port A on a PLR is disconnected, the
module(s)connected to that PLR will turn red. If the PLR has connection and communication via port A, the module(s) connected
to that PLR will turn green.
PL6 Port B Health - will test the ProLink 6 connections via fiber port B on the PLRs. If a fiber going into port B on a PLR is disconnected, the
module(s)connected to that PLR will turn red. If the PLR has connection and communication via port B, the module(s) connected
to that PLR will turn green.
PLR Port A Health - will test the ProLink 5 SATA port A on the PLR. If there is connection where needed (refer to Translation Table), the modules
will turn green. If there is no connection where needed (refer to Translation Table), the modules will turn red.
PLR Port B Health - will test the ProLink 5 SATA port B on the PLR. If there is connection where needed (refer to Translation Table), the modules
will turn green. If there is no connection where needed (refer to Translation Table), the modules will turn red.
PL6 EPLD - will indicate what EPLD firmware is on the PLRs. If all firmware is the same, all of the modules will turn green. If there are modules
with different firmware, all modules connected to those PLRs will turn red.
PL6 Micro - will indicate what Micro firmware is on the PLRs. If all firmware is the same, all of the modules will turn green. If there are PLRs
with different firmware, all modules connected to those PLRs will turn red.
PL5 Port A Health - will test the ProLink 5 connections via SATA port A on the modules. If a SATA cable coming from port A on a module
is disconnected, the module(s) that don't have a connection in port A will turn red. If the module has connection via port A,
the module(s) will turn green.
PL5 Port B Health - will test the ProLink 5 connections via SATA port B on the modules. If a SATA cable coming from port B on a module
is disconnected, the module(s) with no connection in port B will turn red. If the module has connection via port B, the
module(s) will turn green.
PL5 EPLD - will indicate what EPLD firmware is on the modules. If all firmware is the same, all of the modules will turn green. If there are modules
with different firmware, all modules connected to those modules will turn red.
PL5 Micro - will indicate what Micro firmware is on the PLRs. If all firmware is the same, all of the modules will turn green. If there are PLRs
with different firmware, all modules connected to those PLRs will turn red.
Temperature - indicates if a module is too hot or cold. Modules turn green to indicate proper temperature and red to indicate improper temperature.
KB ID: DD2572301
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.