Daktronics

How do I set up Stat Crew TAS for Hockey

Topic

  • How do I set up Stat Crew The Automated Scorebook (TAS) for Hockey?

Environment

  • Stat Crew

Steps

Note: Reference How to set up Stat Crew with the All Sport, DSTI, and Venus 7000, DD2167389 for more information on Stat Crew and DSTI setup.

1. Open up TAS for Hockey software

2. Select Options.

3. Note: Step 3 is only needed in older versions of StatCrew. In the newer versions (2011 releases and newer) these settings will not need to be checked
    a. On In-game options, set Auto-connect to Yes. Go to Game or Match Setup > Remote Display > Comms setup.

DD2557292 3a-1.jpg

DD2557292 3a-2.jpg

DD2557292 3a-3.jpg

    b. Make sure NONE is entered as the Comm port field and leave Baud and Terminal settings as is.
DD2557292 3b.jpg

     c. Press [ESC] to return to the Remote menu, and then select Terminal type.
4. Select scoreboard as the Device Type. Do not use the Daktronics option.
 DD2557292 4.jpg

5. Return to the main application screen, and select In-game scoring once more.
6. Since Auto-connect is turned on, a notification to start the interface will now appear. Press [Y] and then [Enter]. Auto-connect tells TAS to begin updating the "comfile" which sends data to DSTI.
DD2557292 6.jpg

7. Open a competition by going to File > New game. Game information can be entered under Game Setup > Teams.

8. Enter a play to create the "comfile" output that will be used by TasComms32. Plays are entered by selecting Scoresheet > Input.

9. Make sure the comfile is being updated:
 a. Locate the comfile in the program folder for the Stat Crew software.
 b. In windows explorer, go to View > Details and look at the modified date of the file. The modified date should reflect the time when the game was opened.

NOTE: Refer to How to set up TasComms32 serial communication for Stat Crew, DD2557286 for setting up serial communication.
NOTE: Be sure to add starters into StatCrew or the data will offset and cause issues.

KB ID: DD2557292

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.