Can not connect to Omni Sport 2000 console with Hy-Tek Swim Meet Manager (MM), Results port set incorrectly.

Potential Symptoms

  • Can not connect to OmniSport 2000 console with Hy-Tek Meet Manager (MM).
  • Timer Interface in Hy-Tek is¬†set to OmniSport 2000.
  • Straight through serial cable between the computer and J6 (Results Port) on the OmniSport Console is being used.
  • When opening Hy-Tek, a valid (known to be working) Com port number is selected.

Environment

  • Product:
  • Component: Hy-Tek Swim Meet Manager (MM)¬†Software
  • Control System: OmniSport 2000 console

Cause

  • Results port is not set to "Omni 2000".

Resolution

Note that if the OmniSport console is configured for Network MM, that will need to be turned off before the OmniSport Serial Port (J6) will work. (Ref Quick Guide Page 4)
  1. On the console, press the menu button.
  2. Select item 4 (Setup Menu).
  3. Next select item 4 (Comm Ports Menu).
  4. Now select item 3 (Results Port).
  5. Press the down arrow till "Omni 2000" is selected and press enter.
  6. Press the menu key to exit the menus.

Additional Resources

KB ID: DD2410482


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.