Using DakStats Rodeo with DMP-8000

Potential Symptoms

How do I use DakStats Rodeo to play DMP-8000 sequences?

Environment

  • DakStats Rodeo 3000
  • DMP-8000

Resolution

  1. In DakStats Rodeo, go to Configure > Display Buttons, then right-click the Results field and select Configure.

  2. In the RTD Options Configuration window, adjust the settings as follows:
  • Sign Number = sign number of DMP-8000 sign on which content will be played (view Edit Configuration Settings tab of VNET Control Panel)
  • Display Mode = always set to Continuous
  • # of Times = manually set to "0"
  • Frame Number = ensure this field is blank
  • Drive Letter = does not need to be specified
  • Library = location of sequences, typically "C:\ProgramData\DAKTRONICS\VNET4\Content"
  • Sequence = specific sequence to play
  • Contestant Message Number = if the sequence is for a contestant message, specify the message number to display (1-99)

    


Notes:

  • Only the "002-Start Sequence" command is supported, so Library and Sequence names are limited to 8 characters in length.
  • When the Run Performance tab is selected, the "003-Select Frame" command is still sent with a frame number of "1", but the DMP-8000 ignores this command.
  • For more information about DakStats Rodeo, refer the the Installation & Operation Manual (ED-14946).

KB ID: DD2318114


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.