Daktronics

Interfacing ProScore for gymnastics into Daktronics RTD

Potential Symptoms

Interface ProScore with Venus 7000 or a DMP-8000 for gymnastics stats

Environment

  • Product Family: Integration; Stats
  • Product: Gymnastics
  • Component: DMP-8000; Venus 7000 (DMP7000)
  • Control System: ProScore; DakGen

Resolution

ProScore Gymnastics RTD Input

  1. Open DakGen.
  2. Make sure the service is stopped (as indicated by a red or green service button.)
  3. Select Setup.
    DakGen.png
  4. Select UDP or serial as the Interface (Configure the port as needed).
  5. Close out and start the DakGen service (Note if the windows firewall is on or must be on additional configuration may be needed).
  6. Configure the DMP-8000's Auburn Electronics Gymnastics.dsrc UDP value, or Venus 7000 RTD input as needed (Serial or UDP).
    • When using ProScore Gymnastics software and Venus 7000 software, please make sure the following settings are set for the serial RTD Input:
  • Source Type:  Com Port
  • Baud Rate:  19200
  • Parity:  None
  • Protocol: Enhanced
  • Data Bits:  8
  • Default Input Template:  Auburn Electronics Gymnastics.itf
 

KB ID: DD2206695

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.