Sports Wire 4000 conditional play sequence, use select frame in DMP-7000
Potential Symptoms
- Conditional play sequences for OOT content with the DMP-7000
Environment
- Product: DMP-7000
- Components: Out-of-Town, Sports Wire 4000
- Control System: Professional Baseball
Cause
Conditional Play Sequences offer the ability to display different sequences based on the status of the game (Not Started, In Progress, Finished, Delayed). The example below illustrates the 4 frames that are supported by the conditional play sequence.
Resolution
What you need to know:
- In order to interact with each game, the display must be sectioned into windows for each game you are showing at the same time. Ex: If you show 4 games at a time, you need 4 windows.
- Sports Wire sends a Select Frame command based on the game status. Make sure that your sequences are played in "Select Frame" mode on the Venus 7000.
- Use the ITF Swi4KGSISExpandedScores.itf file for Sports Wire 4000 "Expanded Scores".
- Once setup, Sports Wire will automatically send a Select Frame command based on the game status. This triggers the Venus to play the appropriate "look".
- The graphics must be played in "Select Frame" mode on the V7Dsply
- Cannot set multiple outputs in Sports Wire to the same ERTD sign numbers.
Setup Instructions
- Window the display in the Venus 7000. Each game should be in its own window
- Assign unique sign numbers for each window.
- Create the Venus 7000 sequence for the scores that will appear in the first window (Game 1 Window). It should have six frames. (see example illustration above)
- Frame 1: Not Started
- Frame 2: In progress
- Frame 3: Final
- Frame 4: Delayed
- Frame 5: Used for Game With Note
- Frame 6: Blank or Team Graphics used when number of games doesn't match how the display is configured (i.e. only three games but you are showing four games per display)
- Set up the Sports Wire 4000 Output:
- When configuring an output in Sports Wire, use the output type: "Expanded Scores -Enhanced RTD"
- The "Expanded Sign Configuration" window lets you map each game in Sports Wire to a specific Sign Number. Map each game to match the sign numbers in the Venus 7000.
- Restart Sports Wire after setting up the new sign numbers
- Note: Make sure DCGI mode is disabled in the output of Sports Wire; if it is enable no frames will be selected.
- Set up an RTDPlaySequence in a Venus 7000 scripting page button.
- "Select RTD port" should be set to 16 and select next.
- "Sign Number" should be the respective ERTD sign number to the sign you are playing out to
- "Display mode" should be set to "2 - Selected Frame"
- "Frame Number" should be set to 0
- Select the sequence set up in step 3
- All other settings should auto fill or be correct by default, and select next.
- Then finally select finish.
- Test the Game one sequence. Remember to start the sequence in Select Frame mode.
- After confirming that game one is operating correctly and that the sequence has the desired layout, repeat Step 3 for each "Game Window" that you created, using the appropriate RTD fields in the ITF. Ex: If you are displaying 4 games at the same time, you will create 4 sequences. The Game 2 window will use the Game 2 RTD fields from the ITF. The Game 3 window will use the Game 3 RTD fields from the ITF…and so on.
KB ID: DD2134593
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.