V7000: No display output when connected through the VLink. Bypassing VLink causes display to start working.

Potential Symptoms

  • No display output when connected through the VLink.
    Venus Content plays fine to the display when the VLink is BypassedBypassing VLink causes display to start working.  (Bypassing VLink means disconnecting the VLink completely by routing the fiber optic cable directly from the Venus 7000 computer to the fiber optic cable that goes to the Display. This can usually be done by connecting the fiber that is on the output of the VLink directly to the V7000 computer.)

Environment

  • Product: VLink
  • Component: VLink
  • Control System: Venus 7000

Cause

  • VLink not outputting due to either bad settings or Hardware failure.

Resolution

  • Contact Daktronics support to evaluate settings.

For Temporary Operation

  • Bypass VLink and run fiber to VMax card on V7000 computer.  Note:  Only graphics and AVI's from the Venus computer will work until the VLink issue is resolved.

KB ID: DD2055154


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.