FL-2000/4000, dim after installing driver, its set to low manual dimming
Potential Symptoms
- Gas price display digits are dim after installing replacement driver but other displays are correct brightness.
- New digits are still dim on this price line.
- Dim or brightness does not change when testing the photocell with new or old driver.
Environment
- Product: Fuelight or DataMaster, FL-2000, FL-2100, FL-2109, FL-2300, FL-4000, DF-2000, DF-2009, DF-2100, DF-2109, DF-2300, DF-4000, Gas Price or Petroleum Displays
- Component: Dimming
- Control System: DM-100, FLR-500/RC-100, FLR-1500, or FLD-2000 (communication options)
Cause
- Replacement driver is set on either low manual dimming setting or low max intensity auto dim setting.
Resolution
- Go to dimming section on DM-100 or RC-100 (number 3 button).
- Select auto dimming.
- Verify max intensity is set to an appropriate level (max 16).
- Press enter to update display.
- Verify all displays are now the same brightness.
KB ID: DD2009147
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.