How Do I Save My SSR‑DM10 System Configuration as a Preset?

Topic

How Do I Save My SSR‑DM10 System Configuration as a Preset?

Environment

  • Product: Sound Systems
  • Component: SSR-DM10

Steps

Saving a Preset

  1. Enter Advanced Settings.
  2. Use the keypad to enter the admin PIN.
  3. Use the < and > arrows to navigate to Presets.
  4. Tap the NAME field of the desired preset and enter a name (up to 9 characters).
  5. Tap SAVE for the desired preset slot.

Loading a Preset

  1. In the Presets menu, tap LOAD next to a saved preset.
  2. The mixer will reboot and apply the stored configuration.

Important Notes

  • Up to 3 presets can be saved.
  • Saving after major changes is recommended.
  • Powering off the mixer within one minute after changes may prevent them from saving.
  • Loading a preset overwrites any unsaved settings.

KB ID: 000031485

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.