Daktronics

Pitch Clock: How do I display my pitch clock data on my video board?

Topic

How do I display my pitch clock data on being generated from the All Sport on my video board? 

Environment

  • Product: Sports Product, Integration  
  • Components:  All Sport 5000, Control Rack 
  • Control System:  Sport Video, All Sport 

Steps

  1. A Daktronics-issued converter for video board data will be needed, part number is 0A-1453-0179 (LANTRONIX; RS232, 19200, RTD CONFIG, PITCH TIMER) 
  2. Connect the DB25 serial end of the Lantronix device to the 25-pin output (J6) of the All Sport 5000. 
    • The DB25 cable needs to be a null cable.
    • Null cables are generally grey cables with silver ends that we custom build.
  3. Using a Cat5/6 cable, connect the other end of the Lantronix device to the Daktronics network.  
  4. Refer to following support hub on creating content with RTD information: Support Hub - RTD Uses
  5. If needing to add the Pitch Clock source to a dynamic data library profile, reference How to add Pitch Clock Source to Baseball Profile; Using Profile Editor.

KB ID: 000028032

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.