How do I configure a Cudy 4G LT450 modem to work with a Daktronics router?
Topic
- How do I configure a Cudy 4G LT450 modem to work with a Daktronics router?
- How do I configure a Cudy 4G LT450 modem to pass inbound traffic to a Daktronics router?
Environment
- Product: DB-XXXX
- Components: Customer Provided Modem, Daktronics Provided Router
- Control System:
Steps
- Log into the web management page for the modem.
- For assistance accessing and logging into the modem interface, contact Daktronics Technical Support.
- Adjust/Enable DMZ to Daktronics Router
- Go to Advanced Settings (Near the Top of the page) - > DMZ (under Network)
- Toggle/Enable DMZ
- Populate the WAN IP Address of the Daktronics Router.
- Save.
- Under System at the bottom of the page choose the Reboot button to reset the modem
- Note: Do NOT choose the Reset button. That will wipe the configuration.
- Ensure that the modem is physically connected to the Internet port on the Daktronics provided router.
KB ID: 000025869
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.