What do the FL-3000/4500 Driver LED indicators mean?

Topic

What do the diagnostic LED indicators on the FL-3000/4500 Driver tell me?
 

Environment

  • Product: FL-3000, FL-4500
  • Component: Gyrus Driver
  • Control System: FLR3-100, FLR3-1500, FLR3-400, DM-100, DM-100 with 2 serial ports

Steps

  • Reference the below drawing to identify where the listed LED's are located on the Driver. 
    1. DS1 - Comm Port Status - LED will be solid on when a communications device is connected to the J16 port.
      • DS1 might also blink in normal operation - refer to DD1986156 for more info
    2. DS2 - J10 Port - LED will be solid on if a line-to-line cable is detected on the J10 port.
    3. DS3 - J9 Port - LED will be solid on if a line-to-line cable is detected on the J9 port.
    4. DS4 - Heartbeat - LED will blink in 1 second intervals when Driver is properly functioning.
    5. DS7 - Power - LED will be solid on when power is detected.


FL-3000/4500 Driver

KB ID: 000025064


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.