Display Studio: How do I create buttons to execute Layout Editor look changes in Daktronics Show Control System?

Topic

  • Looks or a collection of active zones can generate macros that are pulled from the Venus Layout Editor.  In Show Control's Display Studio, the user can make buttons to execute macros for looks and transitions
  • Play content on zones created in the Layout Editor
  • Show Control's Display Studio script buttons
Layout editor script buttons.jpg

Environment

  • Product: Venus App, Venus Layout Editor
  • Components: DMP-8000, VP-6000  
  • Control System: Show Control System (SCS) version 2.29+, Venus Control Suite (VCS)

DisplayStudio-Logo_Blue.png

Steps

Configuring Zones: Layout Editor: How do I add zones and create looks?

🔽Use the arrows to open or collapse the sections.

Create a button(s) to run a macro to make a Look active. 
  1. In a Display Studio Scripting Container, Right click, select New button.
  2. Give the button an appropriate name.
  3. Add a line of script to run the macro on the DMP-8000:
    1. Select DMP-8000 Run Macro.

layout editor dmp run marco.jpg

    1. Select the DMP used. 
    2. Select the name of the Look created from the Layout Editor.​​​​​

layout editor dmp run marco2.jpg

  1. If you have a VP-6000, add a line of script to run the macro on the VP-6000:
    1. Select VP/DI-6000
    2. Select the VP-6000 used
    3. Select Execute Trigger
    4. Select the name of the look created in the Layout Editor
  2. Optionally, add any content that needs to be played within this button according to your show. 
  3. Save the button.
Create a button to play the content

This script line(s) can be added to the above button depending on the desired workflow and show.)

  1. In a Display Studio Scripting Container, right click, select New button.
  2. Give the button an appropriate name.
  3. Configure the button as follows:
    1. Select DMP-8000 Player Control.
    2. Select the desired zone. 
    3. Select Play.
    4. Click Add.  Navigate to the content's location and select the desired content. Choose Open.

layout editor dmp run marco3.jpg

  1. Save the button. 

 

KB ID: 000023846


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.