Daktronics

Digit and Price Displays: How to change prices on a DM-100 Fuel Display.

Topic

  • First time installation of a display and DM-100 handheld.
  • Customer is unfamiliar with setting prices for gas displays. 
  • How to update gas price displays using a DM-100?
  • How to edit prices on a DM-100 to update the prices on the displays?
  • How do I change the price on my displays using a DM-100?
  • How to edit line prices on gas price displays using a DM-100?
  • How to update or change each line price on a DM-100?

Environment

  • Products: FL-2000, FL-3000, FL-4000, FL-4500
  • Components: Serial Radios, FLXR3, FLXR4, FLR-1500, FLD-2000
  • Control System: DM-100

Steps

  1. Press the Up and Down arrow keys to scroll through the line prices.
  2. Select the line you want to edit and Press Enter/Edit on the DM-100.
  3. Using the numeric keypad on the DM-100 enter the correct price.
  4. Press Enter/Edit to accept the Price.
  5. Press Update Display to send prices out to the display.
With FLR5 Key fob
  1. Press and hold the EDIT key for ~3 seconds to enter the price edit mode. The decimal will blink on the price to be edited.
  2. Use the - and + keys to adjust the active price up and down. Holding the key will slowly increase the speed at which the price changes.
  3. Use the < and > keys to move between prices. The blinking decimal will move accordingly to the price being edited.
    1. If the display is configured for more than one frame, the < and > keys will move through all prices within a frame and then move to the next frame.
  4. Press the check key or the  x key to update the price(s). The decimal will stop blinking. Price edit mode will also automatically exit after 30 seconds with no key presses.

KB ID: 000020180

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.