Vanguard Software trap configuration

Potential Symptoms

How do I enable traps in Vanguard V4 Pro?

Environment

  • Product:  VF,VX, VM
  • Component:  Software, VFC-3000
  • Control System:  Vanguard Professional or Vanguard  Standard Software

Resolution

Configuring Traps in Vanguard Pro:
1. Open System Configuration.
2. Select Manage Displays.
3. Select sign from list that will have traps enable on and select edit properties.
4. Select the Network tab.
5. Check Enable sign callback to enable traps.
6. Enter the desired number in the Callback port that coincides with the controller.

Configuring Traps in Vanguard Standard:
1. Select System options.
2. Select System Configuration.
3. Select Manage Displays.
4. Select sign from list that will have traps enable on and select edit properties.
5. Select the Network tab.
6. Check Enable sign callback to enable traps.
7. Enter the desired number in the Callback port that coincides with the controller.

VFC-3000 configuration
  • Controller's Central IP Port needs to match Callback port in software.
  • Access IP Settings in VFC-3000 to set Central IP Port
1. Log into controller.
2. Access Configuration.
3. Access Communication Configuration.
4. Access Ethernet Control Port.
5. Access Traps. Select setting per desired scenario. (EXAMPLE: ENABLE SOFTWARE PULL OVER TCP)
6. Access IP Settings.
7. Access Central IP Port.
8. Enter new number and press Enter on keypad.
9. Press Cancel on keypad to back out of menu. Controller will initiate a Software Reset and save new number.

KB ID: 000014930

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.