Daktronics

How do I set a DM-100 to the Rate Display function?

Topic

  • How do I set a DM-100 to the Rate Display function?

Environment

 

  • Product: FL-4500
  • Component: DM-100 display function
  • Control System: FLR3-1500 Kit/FLD-2000

Steps

  1. Power up the DM-100 handheld.
  2. Hit the Set function button on the DM-100 handheld when the boot-up of the DM-100 shows Change Function Press Set Function. This option to change the function will only be available for a few seconds. If it is missed, power cycle the DM-100 to try again.
  3. Use the arrow keys to select Rate Display.
  4. Hit the Menu key on the DM-100 handheld.  Hit the down arrow button until it says Display Menu and press Enter,
  5. Hit the down arrow until it says Display Option and press Enter.
  6. Choose the correct decimal location using the down arrow then press Enter on the DM-100 handheld.
  7. Select Enter again and press the Menu Button on the DM-100 handheld.
  8. Resend the price to the display.

KB ID: 000013281

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.