Daktronics

Scoreboard showing wrong information or is blank, Wrong sport code

Potential Symptoms

  • Scoreboard will not display information from the console.
    • Scoreboard will not respond to the console.
    • Display might be blank or partially blank.
  • After entering in code, information not populating in the correct location.
    • Baseball/softball: Ball, Strike, Out information is populating but is also showing same data in the clock digits.
  • Scoreboard horn may not be working or going off and info looks garbled when operating.
  • Scoreboard is displaying wrong sport information.
  • Incandescent scoreboard works, but some digits are flickering instead of changing.
  • Information on LCD screen of console or remote shows information other than what is expected for the sport being played.
    • Baseball/softball (B=0, S=0, I=0 Z-0 H=0) rather than Clock Score information on LCD.
  • Scoreboard lights stay on all the time while the horn goes off about every 30 seconds and also unable to change anything on the scoreboard.

Environment

  • Product: LED Scoreboard, Incandescent Scoreboard
  • Component: Sport code setting
  • Control System: All Sport console, RC-100, RC-200

Cause

  • Wrong code is entered in the console.
    • If scoreboard has a non-addressable driver in it, it will use the non-addressable sport code.

Resolution

  1. Find the correct sport code by following article: What All Sport code should I use for my scoreboard?
    • Sports codes are also listed in the All Sport manual.
  2. Use corresponding sport overlay for sport code selected in step 1.
  3. Power on the console and follow the appropriate instructions below:
  4. For All Sport Console:
  5. For RC-100 or RC-200 Handheld:

KB ID: 000009355

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.