What events are included when Display Events Logging is Enabled in Vanguard
Topic
- What events are included when Display Events Logging is Enabled in Vanguard?
- How to enable event logging in Vanguard?
Environment
- Product: VF-2XXX series displays, Vanguard Display
- Components: VFC
- Control System: Vanguard V4 Professional Software
Steps
- Enable the event logger under display control panel, logging, and configure the display event log.
- For more detailed steps, see How to enable the Vanguard display event log?
-
When you enable the display event log in Vanguard it configures the VFC to log the following events. When the status or value of the Event config Compare object changes the controller will log time and date and the value of the OID in the list.
*The last 6 classes are not regularly usedEventClass# Description Object Name OID mode EventConfigCompare object
(Object that triggers the log)
# of events 1 Message Source mode dmsMsgSourceMode 1.3.6.1.1206.4.2.3.6.7 on change dmsMsgSourceMode 25 2 Message Table dmsMsgTableSource 1.3.6.1.4.1.1206.4.2.3.6.5 on change dmsMsgTableSource 25 3 Message Table IP address dmsMsgRequesterID 1.3.6.1.4.1.1206.4.2.3.6.6 on change dmsMsgTableSource 25 4 Short Error Status shortErrorStatus 1.3.6.1.4.1.1206.4.2.3.9.7.1 on change shortErrorStatus 25 5 Number of Failed Pixels pixelFailureTableNumRows 1.3.6.1.4.1.1206.4.2.3.9.7.2 on change pixelFailureTableNumRows 25 6 Activate Message Error dmsActivateMsgError 1.3.6.1.4.1.1206.4.2.3.6.17 on change dmsActivateMsgError 25 7 Controller Restart watchdogFailureCount 1.3.6.1.4.1.1206.4.2.3.9.5 on change watchdogFailureCount 25 8 Door Open Status dmsStatDoorOpen 1.3.6.1.4.1.1206.4.2.3.9.6 on change dmsStatDoorOpen 25 9 no used 10 Power Supply Failure Field PowerSupplyFailures 1.3.6.1.4.1.1206.3.6.11.1 on change PowerSupplyFailures 25
KB ID: 000004821
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.