Daktronics

How do I pair or connect my Bluetooth device to the Tascam CD-400U?

Topic

  • How do I pair or connect my Bluetooth device to the Tascam CD-400U?

Environment

  • Product Family: Audio Systems
  • Product: SSR-200, SSR-300, Custom
  • Components: Tascam CD-400U
  • Control System:

Steps

  • Bluetooth is not recommended for use during an event due to the possibility of wireless interference causing connection problems during playback.
  • The following information is taken from the CD-400U user manual
  • To Pair a Bluetooth Device:
    1. Make sure your Bluetooth device has its Bluetooth turned on and is within range of the CD-400U.
    2. Select BLUETOOTH as the current source.
    3. Press and hold the BACK/PAIRING button located under the control knob.
    4. A PAIRING message will blink on the display.
    5. On your Bluetooth device, enter its Bluetooth settings menu and select CD-400U.
    6. Some devices require entering a passkey, Enter 0000 if that is the case
    7. When pairing succeeds, the two devices will be connected and BLUETOOTH Connected will appear on the display.
    8. Pairing will automatically end if the connection is not confirmed within 2 minutes
  • To connect a Bluetooth device if it has already been paired:
    1. Set the CD-400U media source to BLUETOOTH
    2. If the unit has just been powered up, it will automatically try to connect with the last device it was connected to. 
    3. If the unit has been on for a while, in your Bluetooth device, select the CD-400U from the device list and it will connect to the CD-400U
    4. To connect a different device
      1. Press the BACK/PAIRING button. 
      2. A BLUETOOTH Disconnect? message will appear on the display
      3. Press the control knob to disconnect the device
      4. The CD-400U is now ready for another device to connect.

KB ID: DD4540546

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.