How can I prevent an unplanned windows 10 update from happening on a Daktronics computer?

Topic

  • How can I prevent an unplanned windows 10 update from happening on a Daktronics computer?

Environment

  • Product Family: Software and Controllers
  • Product:
  • Component: Windows 10 Operating System 
  • Control System:
The following are best practices with preventing unplanned updates with your Daktronics Windows 10 computer. 

Steps

Prior to an event

  1. Look for pending updates
    1. To check for updates, Select the Start button, then select Settings  > Update & security  > Windows Update
    2. If there are updates, choose to install or delay the updates.  See: How can I defer / delay a Windows 10 update on my Daktronics computer?
  2. If updates are not listed, check for manual updates.
    • Select the Start button, then select Settings  > Update & security  > Windows Update . To check updates manually, select Check for updates.
  3. Verify any updates marked "pending install" or "pending restart".

    1. If there are updates, choose to install or delay the updates.  See: How can I defer / delay a Windows 10 update on my Daktronics computer?
    2. After you have installed/delayed those, check again, because there may be more updates to install.  Updates can be pushed in batches, there might be more then one if your computer needs a lot of updates. 

Other options to check

Note: If the computer is off, it will look for updates at the time of startup.  It is best to leave the system on and connected to the internet for automatic updates.

Related Resources

Why does my Daktronics computer restart on Tuesday mornings?

KB ID: DD3932637


Fill out my online form.

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.