Daktronics

Show Control System Triggers: How to add commands to the widget?

Topic

  • Add GPI commands to the Display Studio Trigger Widget that can be triggered by another video switcher or system controller
  • Use the Display Studio Trigger Widget

Environment

  • Product: 
  • Components: Display Studio Trigger Widget 1.1.0.32+, GPI or P-Bus Capable Equipment
  • Control System: Show Control System (SCS) version 2.2+, Live Clips
DisplayStudio-Logo_Blue.png

Steps

Open the Display Studio Trigger Widget labeled Ross Talk or P-Bus from the bottom tool bar. 

Pin the Widget ( version 3.1.0.33 or later)
Click the pin button on any dashboard widget to keep the widget visible when using Display Studio.  If you close and reopen the workspace in the same desktop, the pins should keep their state.  
Screenshot 2022-06-06 161053.png

Choose the + sign to add a new command.
1.pngP-Bus Trigger Widget.PNG
  1. From the command drop down, pick the GPI command or P-Bus register number (1-999) you want to use.
    2.png
  2. Click on Select Script.  This will show a hierarchy list of all the scripts (buttons) in your workspace.
  3. Select the script you wish to trigger from the hierarchy list of scripts.  
    1. There is a expand and collapse all buttons to make searching quicker.
    2. Type the name of the script.
    3. If you have a new script that is not populating.  Click on the refresh button in the upper right corner.
      ross buttons.gif
    4. Save the selected command. 
      3.png
Test: When the switcher or other device sends a specific GPI or P-Bus command, the Display Studio script should play the configured script.   The trigger widget will flash green and indicate what command is playing. 
trigger widget playing.gif 
To learn more about the widget, read this Display Studio Trigger Widget: What is the wiget? . (RossTalk/P-Bus Trigger Widget)

    KB ID: DD3764955

    DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

    DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

    The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.