DSTI: How do I set up the interface for Stat Crew?
Topic
- How do I set up DSTI for Stat Crew?
Environment
- Product: Daktronics Scoring and Timing Interface -DSTI
- Component: Stat Crew, DSTI
- Control System:
Steps
- Locate the computer where DSTI is installed, or if it is not already installed, use the installation CD or download it from DakFiles to install it.
- Note: This could be on the same computer as Stat Crew or another computer.
- Note: If you are install DSTI on a windows 2000 computer. Remove the old version but make sure to backup the dsi file in C:\programsFiles\Daktronics\DSTI. Then install DSTI. This will prevent 2 copies of the same software on the computer.
- Open DSTI by going to Start > All Programs > Daktronics > DSTI > DSTI or select DSTI on the desktop
- Select the correct Sport and confirm Stat Crew is selected as the Interface. If Stat Crew isn't an option, you will need to download the correct DSI (configuration) file. Contact technical support for assistance.
- Error:"Daktronics Scoring and Timing interface.dsi file was not found" You need to install the DSI configuration file provided by Daktronics in the C:\Program Files\Daktronics\DSTI folder.
- If the wrong teams or game information is being displayed. DSTI may be storing old game information. Click Edit > Clear stats data, and then restart DSTI. Old data should be removed. In the future, as new data is receive it will overwrite the old info. After setup is complete, manually clearing stats is not necessary. Normally if this is the problem you may not have incoming stats.
- Error: "Data Type conversion error" Stat Crew may be sending a bad comfile. See DSTI error - Data Type conversion error .
- If Data will not show properly on DSTI input or Tascomms32 does not output data properly see Stat Crew data is not populating properly in DSTI or Tascomms32 and Create new comfile and/or comfile.dak for use with Stat Crew .
- Reference How do I set up Stat Crew with the All Sport, DSTI, and DMPs? for more information on Stat Crew and DSTI setup.
For additional information, consult the Introduction to DSTI training available on YouTube.
KB ID: DD2557294
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.