Ethernet Bridge Radios: How do I get the Diagnostic (EBRD) Utility?

Potential Symptoms

Get the Ethernet Bridge Radio Diagnostic (EBRD) Utility

Environment

  • Product:
  • Component: Ethernet Radios (900XTR models), Ethernet Bridge Radio Diagnostics (EBRD) software
  • Control System: Venus 1500, Venus Control Suite

Resolution

There are two possible routes to get EBRD installed:

  • Option 1 - Internet connection will be needed

  1. Download the EBRD by going to https://dakfiles.daktronics.com/downloads/Venus1500/utils/EBRDiagnostics/
  2. Click on EBRDiagSetup.exe and you may either save the file to your desktop and then run it or run it from dakfiles.daktronics.com.
  3. Proceed to Installer Steps.
  • Option 2 - Venus 1500 Disc version 4 will be required

  1. Place the Venus 1500 v4 installation disk in the CD drive.
  2. Go to the utility option.
  3. Select the EBRD option for installation.
  4. Proceed to Installer Steps.
  • Installer Steps

  1. Once the installer starts hit Next.
  2. After reading the license agreement, select Accept and then hit Next to continue with the installation.
  3. Select Next again to install to the recommended directory.
  4. Select Install.
  5. When installation completes you may select Finish.
  6. After installation, the utility will be accessible either by the desktop icon or by:
    1. Clicking the Windows Start button located at the bottom left of your computer screen.
    2. Click All Programs > Daktronics Utilities > Ethernet Bridge Radio Diagnostics.

KB ID: DD2191992


Fill out my online form.

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.