DM-100 Detects Unused/Extra Networks Due to Server Network Configurations
Potential Symptoms
- During Detect Displays, DM-100 reads extra networks ex: 1 pylon with 1 client, detecting 4 networks instead of 1
- Getting radio comm port error for the unused/extra networks
- Getting display error for the unused/extra networks
- Successfully detects a network with no errors but other networks have errors
- Site is using FLXR3 server/client radios - no jbox
- Updating display shows no sending configuration message
- Server radio is displaying 100 for the signal and the correct amount of networks
Environment
Products: FL-3000
Components:
Control System: DM-100, FLXR-3
Cause
DM-100 detects unused networks because the server's radio setup has enabled subscriptions to networks that are not currently active.
Resolution
- Using an ethernet cable, plug the computer to the server radio
- Open document: FLXR3 Server and Client Radio Installation Procedure Quick Guide and scroll to page 3
- Follow the steps from there to access the server radio web interface
- Click on the tab that shows all subscribed networks
- Remove all unused networks and click apply
- Run Detect Displays on the DM-100: Digit and Price Displays: How do I run the Detect Displays function on a DM-100?
- Detecting displays should now show the correct amount of networks and no errors
KB ID: 000029937
DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.
DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.
The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.