Daktronics

Yamaha TF Mixe: How do I send feeds to the Aux Outputs?

Topic

How do I send feeds to the Aux Outputs on a Yamaha TF Mixer?

Environment

  • Product: SSR-300 or Custom Control System
  • Components:​ Yamaha TF1 or other TF series mixer
  • Control System:

Steps

​Video Available

  1. The aux output sends are located on the right of the mixer. There are 8 mono aux buttons (1 - 8) and 6 stereo aux buttons (9/10 - 19/20)
    TF1 Aux buttons.png
  2. To send signal to an aux output select an aux button like Aux 1
    1. The Aux 1 button will begin flashing blue and the scribble strips will display SEND to Aux 1, this means levels are now being adjusted for the Aux 1  output instead of the main system output.
      TF1 Aux 2_3.gifscribble strip.png
    2. Once in Aux 1 mode, make sure that the aux 1 master on the right is turned ON and turned up to the 0 mark
      aux master.jpg
  3. Make sure the channel(s) to be sent to the aux are turned on using the ON button and turn up the faders to the desired levels to send it to the aux output.
    faders up aux.png
  4. If there are any channels past channel 16, press the INPUT 2 button to access channels 17-32 (these numbers change for TF3 and TF5 mixers as there are more faders)
    input select.png
  5. Select another Aux button so that it starts flashing and use the faders to send channels to that aux output.
  6. To go back to adjusting levels for the main system output. Press the Aux button that is flashing blue.  The Aux button will stop flashing and the words SEND to AUX will disappear from the scribble strips.​

KB ID: 000024942

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.