Daktronics

Pitch Clock: How to use two Pitch Timing Resets with All Sport 5000 console and RC-200 handheld

Topic

  • How to use two Pitch Timing Resets with All Sport 5000 console and RC-200 handheld
  • How do I use two resets when using the RC-200 with Code 98.
  • RC-200 code 98 insert only shows Start, Stop, and Reset; I do not see a Reset 2 key.

Environment

  • Product:  
  • Component:  Pitch Timer
  • Control System:  All Sport 5000 (v4.2.6 or higher), RC-200, All Sport 5100 (not sure what rev it has to be)

Steps

This only applies when the All Sport 5000 is using code 5001 (Baseball). For information on how to operate when using code 6601 (Football) see How to use reset 2 on a RC-100/RC-200 game/dog clock remote start/stop setup with All Sport 5000
 
  • Power on the All Sport 5000 console and verify the firmware is v4.2.6 or higher.
  • On the All Sport 5000 press Menu.
  • Scroll down until you see Reset on Stop = ?.
  • Press Enter/Yes to set Reset on Stop = Y.
  • Press Start on RC-200, verify pitch timer is counting down.
  • Press Stop on RC-200, verify pitch timer reset 1 is displayed.
  • Press Reset on RC-200, verify pitch timer reset 2 is displayed.
***For normal operation of code number 5001 in the All Sport 5100 from the pendant, the RC-200 handheld, and keypad of All Sport console:
 The customer should enable RESET ON STOP and only use the Start and Stop buttons on handheld for each pitch RESET only needs to be hit every half inning after the 3rd out is called.

KB ID: 000020671

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.