Daktronics

How do I adjust the 9/10s, Tails, domestic and international modes using a Key Fob?

Topic

  • How to set configuration for 9/10's (FL-3000) or decimal (FL-4500) digit and tails/no tails on numbers 6 and 9 for FL-3000 or FL-4500 series gas price displays?
  • How do I configure an FL-3000 to be an FL-4500 for international use or vice versa?

Environment

  • Product: Fuelight, FL-3000, FL-4500, Gas Price or Petroleum Price Display, FL digit product
  • Component: Configuration of 9/10, tails, and Domestic/International Mode
  • Control System: FLR3-100/FLR3-400 Key Fob (Wireless Communication Option)
    • Handheld, Remote, Radio

Steps

  1. Press and hold the Plus(+) and Minus (-) keys on line three of the key fob until all displays show the numbers 6 and 9. The number scheme will be either 3.69 9/10 or 4.69 9/10.
  2. Press  Plus(+) or Minus (-) keys on line 3 to scroll through the different configuration options. (6 total configurations to choose)
    • Note: Domestic displays (with a 9/10's digit), the number 3 needs to show in the first column for the desired format.  International displays, make sure the number 4 shows in the first column for the desired format.
  3. When the desired configuration is shown on the displays, press and hold the Plus(+) and Minus(-) keys on line three to exit configuration mode.  See the following pictures for available options:
    tails tenths configuration picture.pngInternational tails no tails.png

Refer to the Installation Quick Guides for more information. 

KB ID: 000013366

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.