Display Studio Status Error red, Local Scope Missing in Daktronics Show Control System

Potential Symptoms

  • Getting "Local Scope Missing. Use 'Create Scope' button to restore scope on local machine" error on Display Studio
  • Show Control System: Display Studio Status Error 
    DD2628101-image1.png

Environment

  • Product: Display Studio
  • Component: Server and client setup
  • Control System: Show Control System

Cause

  • Display Studio computers have lost sync.

Resolution

  1. Exit Display Studio and Content Studio for the Display Studio Server and all Client (User Station) machines - all Display Studio machines need to have Display Studio closed.
  2. Ensure SQL Server (NUCLEUS) Service is running by accessing Services.msc.
  3. At the client Display Studio machine, open the Nucleus Sync Utility 2.0 by navigating to Start -> Programs -> Daktronics -> Utilities -> Client Server Sync Utility.
  4. You should see the following screen. On the server computer, the Mirror Server to Client and Synchronize buttons will be grayed out since the server does not mirror or synchronize with itself.
    Nucleus Sync Utility - SCU-3.JPG
    Note: Steps 5-8 may each require multiple minutes to complete.
  5. Under the Advanced menu, select Cleanup Disk Data.
  6. Click Create Scope and wait for that to complete.
  7. Click Mirror Server to Client and wait for that to complete.
  8. Click Synchronize and wait for that to complete.
  9. Close the Nucleus Sync Utility.
  10. Repeat steps 1-8 for all Display Studio Client computers. Complete all steps for one client before proceeding to the next client.
  11. Open Display Studio to confirm the error has cleared.

KB ID: 000010147


DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.