Daktronics

DMP-8000: What are the compatible firmware versions of Black Magic and the DMP?

Topic

  • What versions are compatible throughout DVX/DVN Standard Video sites?
  • What are the qualified component version sets for Black Magic drivers and DMP-8000's?

Environment

  • Product:
  • Components: Black Magic Drivers, DMP-8000
  • Control System: Display Studio

Steps

 

Important Notes: 

  • Version used w/ the BM card may vary based on revision of the capture device.  DMP-8000 Firmware Revisions are base versions of compatibility.
  • In most cases, an update to Black Magic version 10.9.x or higher requires running Windows Updates to obtain the required certificates previous to the update. This requires internet access; temporary internet access via a hotspot or similar device is sufficient.
  • If a DMP cannot be updated past a certain firmware version based on the qualifiers below, it may generate a yellow status light in Display Studio asking for the DMP firmware to be updated. This occurs when the Display Studio version contains features that the current firmware of the DMP cannot support. This does not impact the base functionality of either Display Studio or the DMP, just the added functionality provided within the firmware updates of Display Studio. This will also not impact DMPs onsite that can be updated to the most recent released version, as these will support the features provided by the updated version of Display Studio.
  • Windows 7 support was discontinued by Blackmagic after version 11.5 and by Daktronics DMP after version 9.xx.
 
Firmware SetsBlackMagic Suggested Firmware VersionDMP 8000 Base Firmware Version (earliest recommended version. May work with later versions up to current)
DMP-8000 XP Systems with Black Magic Devices10.1.16.2
DMP-8000 Systems with Black Magic Devices At or Above 10.4.3NIC driver must be installed on DMP before updating BM. 
DMP-8000 System with Intensity Shuttle or Multibridge Pro Device10.4.37.17
DMP-8000 System without Internet access10.5.47.20.0.29
DMP-8000 Windows 711.5 (latest Win7 supported driver)9.x
DMP-8000 Windows 1014.0+10.0+
 Additional Notes:  

If there is a Windows 7 machine - updating to 9.33 can may help.

If this is a Windows 10 machine - update to 10.4 which will also require a Blackmagic driver update to 12.8 or higher.

 

 

KB ID: 000001534

DISCLAIMER: Use of this content may void the equipment warranty, please read the disclaimer prior to performing any service of the equipment.

DAKTRONICS DOES NOT PROMISE THAT THE CONTENT PROVIDED HEREIN IS ERROR-FREE OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE CONTENT WILL PROVIDE SPECIFIC RESULTS. THE CONTENT IS DELIVERED ON AN "AS-IS" AND "AS-AVAILABLE" BASIS. ALL INFORMATION PROVIDED IN THIS ARTICLE IS SUBJECT TO CHANGE WITHOUT NOTICE. DAKTRONICS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DAKTRONICS DISCLAIMS ANY AND ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF YOU OR ANY THIRD PARTIES IN CONNECTION WITH OR RELATED TO YOUR USE OF THE CONTENT. ADJUSTMENT, REPAIR, OR SERVICE OF THE EQUIPMENT BY ANYONE OTHER THAN DAKTRONICS OR ITS AUTHORIZED REPAIR AGENTS MAY VOID THE EQUIPMENT WARRANTY. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE CONTENT AND ANY LINKED CONTENT. YOUR SOLE REMEDY AGAINST DAKTRONICS FOR DISSATISFACTION WITH THE CONTENT IS TO STOP USING THE CONTENT. THIS LIMITATION OF RELIEF IS A PART OF THE BARGAIN BETWEEN THE PARTIES.

The above disclaimer applies to any property damage, equipment failure, liability, infringement, or personal injury claim arising out of or in any way related to your use or application of the content, whether such claim is for breach of contract, tort, negligence or any other cause of action.